20" Hot-Expanded Astm Standard Thick Wall Seamless Steel Pipe
Product Description
Specifications
astm a335 gr p91 Seamless Alloy Steel Pipe
1.Standard:BS, GB, DIN, ASTM, API
2.OD:1/8 inch - 32 inch
3.WT:1mm - 100mm
astm a335 gr p91 seamless Alloy Steel Pipe
Detailed introduction to ASTM A335 P91 Alloy Seamless Steel Pipe:
ASTM A335 P91 pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding.
The steel material shall conform to chemical composition, tensile property, and hardness requirements.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Chemical Requirements of ASTM A335 P91
UNS Designa-tion | K91560 |
Carbon | 0.08-0.12 |
Manganese | 0.30-0.60 |
P&S | 0.020-0.010 |
Silicon | 0.20-0.50 |
Chromium | 8.00-9.50 |
Molybdenum | 0.85-1.05 |
Others | _ |
Mechanical Properties of ASTM A335 P91
Properties | Data |
Tensile strength, min, (MPa) | 585 |
Yield strength, min, (MPa) | 415 |
Elongation, min, (%), L/T | 20/... |
Material & Manufacture
Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.
Heat Treatment
A / N+T
N+T / Q+T
N+T
Mechanical Tests Specified of ASTM A335 P91
Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.
Notes for Bend Test:
For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.
Permitted tolerance for OD
OD | Plus tolerance(+) | Minus tolerance (-) |
10.29_48.3 | 0.4 | 0.4 |
>48.3_-≤114.3 | 0.79 | 0.79 |
>114.3_≤219.1 | 1.59 | 0.79 |
>219.1_≤323.9 | 2.38 | 0.79 |
>323.9 | ±1% |
Wall thickness is average wall or according to ASME SA530.
Contact us if you need more details on Thick Wall Seamless Steel Pipe. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Astm Standard Seamless Steel Pipe、Hot-expanded Seamless Steel Pipe. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Seamless pipe > Seamless Steel Pipes
Premium Related Products
Other Products
Hot Products
polypropylene water pipe specificationHigh quality polyethylene pipe for water supplyen 10305 e235 precision seamless steel tubeCarbon steel TUBES/ Electric resistance welded ERW TUBESA 179/A 179M seamless cold drawn low carbon steel heat exchanger and condenser tubesastm a355 p22 seamless alloy steel pipeDIN1629 ST45 14 inch carbon steel pipesa 192 boiler seamless tubeastm a106 gr.b schedule 80 pipeColor Roofing Sheet Galvanized Corrugated Iron SteelDX51 ZINC Cold Rolled/Hot Dipped Galvanized Steel Coilsa 179 carbon steel pipesch 120 carbon steel seamless pipeAISI 4140 seamless alloy chrome steel tube4140 Seamless Steel Tube and PipesLine pipe for sour service