High Frequency Welded Steel Tube Mill Line

High frequency welded Steel Tube mill line

The raw material of the high frequency welded steel tube mill line can be cold-rolled and hot-rolled coil strip .

The thickness of it is from 0.5 mm to 2.5mm . This welded tube mill line is used to produce the rould tube from Φ16mm-Φ50mm .

The flow of the whole Welding Unit Of Tube Mill

Coil loading-Uncoiling‐Strip joining-accumulator-Forming,‐HF Welding–Bead Remover ‐Cooling-Sizing & straightening‐Measuring roll-Flying saw cutting-Double dumps Run out conveyor

Technical parameters of High Frequency Welded Steel Tube Mill Line

a) Steel Pipe Specification

Pipe diameter:Ø16–Ø50mm

Pipe Thickness: 0.5– 2.5mm

Square Pipe:14X14mm –40X40mm

Rectangle Pipe: 10X20mm –40X50mm

Pipe Thickness: 0.5–2.0mm

Pipe Length: 6-9m

Length Tolerance:0-3mm

b) Steel Tape Specification

Material:Low Carbon steel (δb≤500Mpa, δs≤235Mpa)

Steel Tape:

Inner diameter: Φ580-Φ610mm

Outer diameter: Φ900-1500mm

Strip steel width: 60mm-200mm

Strip steel thickness0.5mm-2.5mm

The maximum weight:3.0 tons

c) Electricity

Dynamic power: AC380V±10%, 3phases, 50Hz±10%

Control Power:AC220V±10%, one phase, 50Hz ±10%

Electric installed capacity: appro 450KW

e) Cooling water

Reservoir for High Frequency equipment:15 m³, one set

Reservoir for circulating cooling water:15 m³, one set

f) Compressed air

Pressure:0.4Mpa

Flow:0.5m3/h

g) Line speed:30-90m/min

Contact us if you need more details on Welded Steel Tube Mill Line. We are ready to answer your questions on packaging, logistics, certification or any other aspects about High Frequency Welded Steel Tube Mill、Welded Steel Tube Mill. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Welded Tube Mill